XINGO
Products
CEDAR TYPE TIE HOLDER
Tel:13858450999
Email:cableties@cabletiecompany.com
This Cedar Type Tie Holder is an integrated wire harness fixing accessory combining a stud-type mounting base and a nylon cable tie, specially developed for installation scenarios with pre-installed studs on sheet metal, plastic housings, and other substrates.
Contact:Dragon liTel:13858450999
Email:cableties@cabletiecompany.com
This Cedar Type Tie Holder is an integrated wire harness fixing accessory combining a stud-type mounting base and a nylon cable tie, specially developed for installation scenarios with pre-installed studs on sheet metal, plastic housings, and other substrates.
Product Dimensions
| ITEM.No. | LENGTH (mm) | WIDTH (mm) | HOLE DIA. (mm) | BUNDLE DIA. (mm) | MIN.LOOP TENSILE STRENGTH | |
| LBS | KGS | |||||
| XZJ-5x160CTH-M6 | 160 | 5 | M6 | 3-35 | 50 | 22 |
| XZJ-5x160CTH-M5 | 160 | 5 | M5 | 3-35 | 50 | 22 |
| XZJ-5x170CTH | 170 | 5 | M5/M6 | 3-36 | 50 | 22 |
| XZJ-5×215CTH | 215 | 4.6 | M6 | 3-50 | 50 | 22 |
| XZJ-6x160CTH | 160 | 6 | M6 | 3-35 | 66 | 30 |
| XZJ-6×166CTH | 165 | 6 | M6 | 3-35 | 66 | 30 |
| XZJ-6×170CTH | 170 | 6 | M6 | 3-36 | 66 | 30 |
| XZJ-9x170CTH | 170 | 9 | M5/M6 | 3-38 | 122 | 55 |
| XZJ-8×160CTH | 160 | 8 | MS/M5 | 3-35 | 110 | 50 |
